Feature:
The LC-6.1200 features six high-power channels that deliver up to 1200-Watts of pure audio bliss, allowing you to hear every detail of your music like never before. With Accubass technology, this amplifier ensures that your bass is always powerful and distortion-free, no matter the volume.
Features
-
AccuBASS: The patented AccuBASS processing circuit compensates for factory bass rolloff to improve bass performance, especially with most factory installed sound systems. The circuit has two rotary controls: Threshold lets you dial in the level at which the AccuBASS will begin to work, while the Level control raises or lowers the level of AccuBASS compensation. A slide switch allows the AccuBass feature to quickly be Enabled or Disabled.
-
ACR-1 Remote: The optional AudioControl ACR-1 wired remote (sold separately) lets you adjust the subwoofer output level from the driver's seat. The remote level control comes with a 20' cable, terminating in an RJ-14 jack that plugs into the amp, and is designed to be mounted under a dash for easy access while driving.
-
Maximum Input Level Control (MILC): The amplifier analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED lights red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will light to indicate the gain is set to the optimum level.
-
GTO (Great Turn On) Signal Sense: If you are connecting the amplifier to a factory stereo or an aftermarket unit without a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off. An On/Off slide switch is provided on the amp activate the GTO Signal Sense feature.
-
Controls: The LC-6.1200's controls are located under a removable protective panel. The included 2.5mm Allen wrench is needed for removing the panel during setup. A flat-head screwdriver (not included) is needed to adjust the rotary controls.
-
Connections: The LC-6.1200's connections are aligned along the front of the amplifier for ease of installation. The amp's connections include:
-
Fuses: Three 40A ATO blade-type fuses are installed in the amplifier.
-
Power: Set-screw terminals are provided for connecting +12V Power, Ground, and Remote In. The set screws can be tightened/loosened with a Phillips-head screwdriver (not included). The Power and Ground terminals will accept 4 to 0 gauge wire, while the Remote In terminal accepts up to 6 gauge. A 120A fuse should be placed in-line on the power wire, no more than 18" from the battery.
-
Line Level Inputs: Three pairs of RCA jacks are provided for connecting the amp to the source unit via RCA cables.
-
Line Level Output: One pair of RCA jacks for feeding the signal to another amplifier.
-
Speaker Level Input: Four sets of removable Phoenix (or Euroblock) connectors are provided for connecting the source unit via speaker-level input. The speaker wires are inserted into the connector and tightened with a screwdriver (5/64" Precision Phillips-head, not supplied). The connectors are labeled Front High (for tweeters), Front, Rear, and Sub.
-
ACR-1 Remote Level Control: This RJ-14 telephone-type connection allows you to plug in the optional ACR-1 Remote. The ACR-1 controls the output level of the amplifier and line outputs.
-
Speaker Output: Three removable Phoenix connectors are provided for connecting speaker wire. The amplifier will accept a load impedance of 2Ω or higher in stereo (4Ω or higher when bridged). The speaker wires are inserted into the connector and tightened with a screwdriver (9/64" Precision Phillips-head, not supplied).
What's in the Box
- 6-Channel Amplifier
- Three 40-amp ATO fuses
- 2.5 mm Allen wrench
-
User Guide
